1.5.5 B Pegboard Toy Presentation

Please make a copy of 1.5.5B Pegboard Presentation Drawings  into your GTT Turn in Folder.  There are no questions for this part, but you will need to turn in the file before the end of class on Friday so that I can give you points for the work you did in class.

Follow all written directions needed to complete the .ipn files that are described.

I want you to try to read and follow the written directions first. Then watch the video only if you get stuck.

To watch this on YouTube - https://youtu.be/jlfuRC-EjTE

1.5.5 A Pegboard Toy Working Drawings

Please make a copy of 1.5.5A Pegboard Working Drawings  into your GTT Turn in Folder to be turned in before the end of class on Friday.

Follow all written directions needed to complete the .idw files that are described.

I want you to try to read and follow the written directions first. Then watch the video only if you get stuck.

To watch this on YouTube - https://youtu.be/NlxSzUg9QCY

If at this point, you do not have your parts completed, you may use the ones that I created.
You must download all of the parts one at a time and save them into one of your folders or the assembly will not open correctly.  Please save all downloads to the same spot before opening them.

Round Peg      Square Peg     Triangular Peg     Pegboard     End

Pegboard Assembly

1.5.5 Constraining Parts and Projecting Geometry

Please follow all written directions found in your worksheet for 1.5.5 Pegboard Toy  

How to make the parts you need:

To watch this on YouTube - https://youtu.be/J9iZPh9R1K8

How to constrain your Pegboard Toy:

To watch this on YouTube - https://youtu.be/Xccri_A3sZo

How to project your geometry:

To watch this on YouTube - https://youtu.be/4KAmy9Wv3Xo

How to add a triangular hole:

To watch this on YouTube - https://youtu.be/0sbnPq_W0G8

How to make a mallet head: (your's should look cooler)

To watch this on YouTube - https://youtu.be/mcF0zTIQHL8

1.5.5 Pegboard Toy

Shortcut Keys you might want to use

Step 1) Make a copy of  1.5.5 Pegboard Toy into your GTT Turn in Folder.  There are only 2 conclusion questions that must be answered by Friday. The rest of this week long project will all be hands-on creation using Inventor.

Step 2) Open Autodesk Inventor Profession 2016 and follow the directions on the worksheet to create and save a Round Peg.ipt, Square Peg.ipt and Pegboard.ipt

Try reading the instructions and see how you can you do on your own before watching the how to videos

 

To watch this on YouTube - https://youtu.be/J9iZPh9R1K8

DO NOT GO TO THE NEXT STEP UNTIL YOU HAVE CREATED YOUR 3 PARTS

Step 3) Watch the video below on Contraints in an Assembly. 
Step 4) Follow the worksheet directions to create a Pegboard Assembly. Make sure that in your finished product you can move the round peg and square peg and they are always constrained to the round hole and the square hole.
Step 5 Create a Triangular Peg and add a triangular hole to your original pegboard sketch.
Step 6) Create a Mallet Head and Handle for use with your Pegboard Toy.
Step 7) Put them all together in one assembly and show to your teacher for final inspection.

Try reading the instructions and see how you can you do on your own - before watching the how to videos

To watch this on YouTube - https://youtu.be/mi1bvwsGF8k

1.5.4 Sketch Plane Cube Day 2

Step 1) Make a copy of  1.5.4 Sketch Plane Cube into your GTT Turn in Folder.  There are only 3 conclusion questions that must be answered, but you will need the drawing to help you dimension your creation.

Step 2) Open Autodesk Inventor Profession 2014 and create a new Standard.ipt 

Step 3) When that opens select 2d Sketch by clicking on the pencil and drafting angle in the upper left hand corner and select the X-Y Plane to work in. 
Step 4) Use the line or rectangle tool to draw a 2" square.  Dimension it to be 2 inches on each side with 90 degree corners, if you have not already done so.
Step 5) Click Finish Sketch and Extrude your square 2 inches to create your 3d cube
Step 6) Right click on a different side Create a new 2d sketch and use that sketch to extrude a 1" square, 1/2".
Step 7) Right click on a side to create a new 2d sketch and use that sketch to extrude a 1" circle, 1/2".
Step 8) Use the Hole feature or Extrude (cut) to drill a 1" diameter hole all of the way through the cube. 
Step 9) Find where you can change the materials and find one you like, then use your tools to get it to rotate.
Step 10) Answer the conclusion questions and turn in your worksheet online using Canvas.


If you finish early try out different materials or change its appearance to make it look like a cool artifact that you might find on Mars. Then get it to start spinning on your screen.

Step by step - how to open Inventor and create your cube

To watch this on YouTube - https://youtu.be/Qkz8GEDcDn8

Same instructions but at full speed

To watch this on YouTube - https://youtu.be/w0HTOX1UyP4

What happens if something goes wrong

To watch this on YouTube - https://youtu.be/d3RXlHBEwQM