1.5.4 Sketch Plane Cube

Step 1) Make a copy of  1.5.4 Sketch Plane Cube into your GTT Turn in Folder.  There are only 3 conclusion questions that must be answered, but you will need the drawing to help you dimension your creation.

Step 2) Open Autodesk Inventor Professional 2016 and create a new Standard.ipt 

Step 3) When that opens select 2d Sketch by clicking on the pencil and drafting angle in the upper left hand corner and select the X-Y Plane to work in.

Step 4) Use the line or rectangle tool to draw a 2" square.  Dimension it to be 2 inches on each side with 90 degree corners, if you have not already done so.

Step 5) Click Finish Sketch and Extrude your square 2 inches to create your 3d cube

Step 6) Right click on a side to create a new 2d sketch and use that sketch to extrude a 1" circle, 1/2".

Step 7) Right click on a different side Create a new 2d sketch and use that sketch to extrude a 1" square, 1/2".

Step 8) Use the Hole feature or Extrude (cut) to drill a 1" diameter hole all of the way through the cube. 

Step 9) Find where you can change the materials and find one you like, then use your tools to get it to rotate.

Step 10) Answer the conclusion questions and turn in your worksheet online using Canvas.


If you finish early try out different materials or change its appearance to make it look like a cool artifact that you might find on Mars. Then get it to start spinning on your screen.

To watch this on YouTube - https://youtu.be/nfVhSzhFp3I

1.5.2 Computer Modeling Fundamentals Part B

Step 1) Open you copy of  1.5.2 Computer Modeling Fundamentals that you made yesterday.  This video starts off at #6 for #1-5 you will need to go back to the video from yesterday.

Step 2) Watch the video below, pausing, rewinding and re-watching as needed.

Step 3) Every time a new step is shown, pause the video and try it on your own in Inventor.
Step 4) Use the navigation bar to determine what each of the icons do
Step 5) Open back up your worksheet from 1.5.1 to get the coordinates of the Square, Triangle, Circle and Pentagon to practice the precise input toolbar. 
Step 6) Answer the conclusion questions and turn in your worksheet online using Canvas.

This video is kind of long, do not watch it all of the way through in one sitting - Please watch the video until you are shown how to use a constraint, then pause the video and try it on your own.

1.5.2 Worksheet #6

If the video above fails to load, try watching it on YouTube at https://youtu.be/TJk3ogUdOHc

1.5.2 Worksheet #7 and 8

If the video above fails to load, try watching it on YouTube at https://youtu.be/ss7aXWYEU0U

1.5.2 Computer Modeling Fundamentals

Step 1) For the lesson for 1.5.2 Computer Modeling Fundamentals, you will need to make a copy of the Worksheet online for you to be able to answer your questions.

Step 2) Watch the first video below, pausing, rewinding and re-watching as needed.

Step 3) Answer all questions digitally and be prepared to turn in 1.5.2 from your GTT Turn in Folder using Canvas tomorrow. For special symbols, there may also be keyboard equivalents such as || for parallel or (o) for concentric but for the horizontal icon, you can copy, paste and rotate a similar icon.

Step 4) Only once you get to #6 on the worksheet will you need to draw and manipulate parts using Inventor Autodesk to try and figure out what each constraint feature does to your drawings.

If the video above fails to load, try watching it on YouTube at https://youtu.be/_gdL8edL7J4

1.4.5 Dimensioning

Step 1) For the lesson for 1.4.5 Dimensioning, I do not want you to fill out the worksheet packet as I do not expect you to memorize the 8 rules of dimensioning.  Instead I want you to watch the videos looking at the features of the good and bad examples.  Hopefully yours will be more good than bad.

Step 2) Watch the video below, pausing, rewinding and re-watching as needed.

Step 3) Draw each view of the figures on the last 3 pages of your sketch packet into their dimensioned components.

Step 4) Double check that your name and period are written on your sketch packet then turn them in to be graded.

Your grade for 1.4.5 comes from your sketch packet, NOT the worksheet online.

if the video above fails to launch, watch it on YouTube at https://youtu.be/fnZl52NJ3tU 

if the video above fails to launch, watch it on YouTube at https://youtu.be/NPMNsLn5Q-A 

1.4.4 Orthographic Projection

Step 1) Open and make a copy of 1.4.4 Orthographic Projection into your GTT Turn in Folder with your initials at the end

Step 2) Watch the video below, pausing, rewinding and re-watching as needed.

Step 3) Answer the questions digitally online, and sketch using the papers provided. When drawing your sketches please start off with light construction lines.  When you want to finalize them into object lines, please use your ruler to insure a nice straight line.

Step 4) Turn in your worksheet from your GTT Turn in Folder, your paper sketches will not be collected until Friday.

if the video above fails to load, try watching it on YouTube at https://youtu.be/IRF6H4gQIC8 

1.4.3 Sketching Practice

Step 1) Open and make a copy of 1.4.3 Sketching Practice into your GTT Turn in Folder with your initials at the end

Step 2) Watch the video below, pausing, rewinding and re-watching as needed.

Step 3) Answer the questions digitally online, and sketch using the papers provided. When drawing your sketches please start off with light construction lines.  When you want to finalize them into object lines, please use your ruler to insure a nice straight line.

Step 4) Turn in your worksheet from your GTT Turn in Folder, your paper sketches will not be collected until next Friday.

If the video above fails to load, try watching it on YouTube at https://youtu.be/kBErwlAskPc

1.4.2.A Sketching Techniques

Step 1) Open up 1.4.2.A Sketching Techniques and make a copy of it into your GTT Turn in Folder with your initials at the end

Step 2) Watch the video below, pausing, rewinding and re-watching as needed.

Step 3) Work with your partner to complete and double check your answers to your worksheet - AND #4 in your sketch packet

Step 4) Submit your completed digital file into Canvas for grading before Friday, but hold onto your sketch packet, it will be needed in the next few sections.

If the video above fails to load, try watching it on YouTube at https://youtu.be/sfjFmGOGuiQ 

1.4.1 Language of Sketching

For today's lesson:

Step 1) Watch the video below about the lab we are going to do today

Step 2) Open up the worksheet - 1.4.1 Language of Sketching and make a copy into your GTT Turn in folder.
 Step 3)Complete the worksheet while watching the video below.  Please pause, rewind and re-watch the as many times as are needed to complete the worksheet.

Step 4) Submit your completed worksheet into Canvas for grading before the end of class Friday

Step 5) Double click on the file that you just turned in to make double sure that you just submitted the file that you wanted to be graded.

1.3.4 Measurement Lab Skimmer - Day 2

This video shows you step by step how to draw the lines for your skimmer.  Please use a ruler to practice your measuring skills and to make sure your lines are straight as they can be.
In the video, I use a folder that is skinnier than yours - You will have extra room at the right side of your folder. Yours is longer than the one I used.




This video shows you step by step how to cut out the parts for your skimmer. Cut on the solid lines only.




This video shows you step by step how to assemble the parts your skimmer using glue and tape. 

1.3.4 Measurement Lab - Skimmer

Step 1) Go to Canvas and make a copy of 1.3.4 MeasurementLabSkimmer into your GTT Turn in Folder with your initials at the end

Step 2) Watch the video below

Step 3) Use a ruler to mark all of the needed lines - dark lines will be cut along, dotted lines are for folding
Step 4) Cut, assemble and test your air skimmer then answer the 3 conclusion questions on your worksheet

Step 5) Turn in your worksheet from your GTT Turn in Folder

If the video above fails to load, try to watch it on YouTube at https://youtu.be/WpihN8RpTak

This video shows you step by step how to draw the lines for your skimmer.  Please use a ruler to practice your measuring skills and to make sure your lines are straight as they can be. In the video, I use a folder that is skinnier than yours - You will have extra room at the right side of your folder. Please realize that your folder is longer than the one I used, do not try to make yours look exactly like mine.

If the video above fails to load, try to watch it on YouTube at https://youtu.be/VXBZhGYIH9U

This video shows you step by step how to cut out the parts for your skimmer. Cut on the solid lines only.

If the video above fails to load, try to watch it on YouTube at https://youtu.be/fA6swSycRKA

This video shows you step by step how to assemble the parts your skimmer using glue and tape.

If the video above fails to load, try to watch it on YouTube at https://youtu.be/Y6-NJCcyDLk

1.3.2 Standard and Metric

Step 1) Please open up the worksheet 1.3.2 Standard and Metric and make a copy into your GTT Turn in folder.

Step 2) Work with your partner to complete your worksheet while watching the video below

Step 3) Turn in your worksheet from your Canvas account

if the video above fails to load, try watching it on YouTube at https://youtu.be/Ltb4VPi_51g

1.3.1 History of Measurement

Step 1) Please open up the worksheet 1.3.1 History of Measurement and make a copy into your GTT Turn in folder.
Step 2) Watch the video below for background information on the history of measurement

Step 3) Work with your partner to complete your worksheet

Step 4) Turn in your worksheet from your Canvas account

If that video fails to load, watch it on YouTube at https://youtu.be/9JZRkft56SE